I needed a cluster enclosure for a low-wattage server farm and the Cloudlet enclosure by C4 Labs was perfect. I am using the enclosure to host my business website with 8 load-balanced raspberry pi zero v1.3s running nginx. A reverse proxy in the DMZ is used to load balance the raspberry pi cluster housed in this enclosure. The load balancer also maintains the TLS connection with clients. The proxy fetches the site from the cluster using http which is perfect for speed.What I like about the Cloudlet CASE:1.) nice aesthetics! Fluorescent green against black is a great combination.2.) sturdy outer chassis3.) Extra hardware provided in case you lose a bolt or nut.4.) Came with two extra acrylic fluorescent green mounting inserts in case two break. Be careful super-gluing broken inserts since you can easily cause permanent smears that look unattractive.What I think needs improvement:1.) There is a slot on the fluorescent green acrylic mounting inserts towards the front (just behind where the fans are to be mounted) that weakens the inserts. One insert already snapped at this weak point. The slot measures 1" x 0.05" and does not appear to serve a use case from the customer's perspective. It should be removed in future versions of the product for quality purposes.2.) Mounting insert slot placement inside the chassis could use improvement. I have attached pictures of the network adapter I am plugging into my raspberry pi zeroes. It's the ENC28J60 Geek PI Overlay Hat v1.02. Originally, I intended to use only one mounting insert per pi and use all 8 mounting inserts, but had to make modifications to my design since the mounting insert slots inside the black chassis are spaced too closely to accommodate the thickness of adding the network hat atop the raspberry pi zero. Therefore, I cannot use all 8 inserts and must mount two raspberry pi zero's on a single mounting insert and use only four of the 8 mounting inserts. I do understand this alteration to the design would require a bit wider chassis, but it would be a nice improvement to accommodate the entire Raspberry Pi model lineup with a wider range of hats and still have nice airflow.3.) I have attached a picture of the YwRobot® USB Power Supply Module Micro USB Interface 3.3V 5V 1117 Chip which would be a great add-in to the case for an alternate power supply for the fans. It's super cheap too and would not increase the price of the case that much. I got one from banggood for only $3. In fact, shipping costed more than this little guy. I am using the YwRobot right now to power the fans since all my GPIO pins are in use by the ENC28J60 overlay hat. The manufacturer C4 suggests using GPIO to power the pins, but this sacrifices functionality of the Pi that system builders may want to use. Therefore, the Ywrobot is the perfect solution, and I think a lot of people would love the addition.4.) People were complaining about the noise of the fans. I think the noise level is perfectly acceptable. An added bonus of the YwRobot (mentioned above) is that it has both a 3.3v and a 5v rail. Both rails have 8 pins allowing you to plug in all 4 fans effortlessly. If you want less noise, plug all of them into the 3.3v rail, but I think running them at 5v is a better idea since I am not using a heat sink on my pi zeroes.5.) The fluorescent green mounting inserts seem to have have plenty of room for more mounting holes to accommodate all raspberry pi models including the zero, but only two holes on one side of the pi zero can be mounted to the insert at a time. In fact, there are two places on the mounting insert where you can mount only two holes on one side of the pi zero. It would be nice to have all 4 holes of the raspberry pi zero mountable since the GPIO headers protrude from the bottom of the PCB and present a lateral strain on the pi zero when connecting cables or GPIO hats. If all 4 holes are mounted, the strain is equalized and you don't have to worry about a poor connection or risk of damage to the pcb (or mounting inserts) when disconnecting cables or hats. My solution was to use the included little gold-colored mounting nuts underneath each of the 4 mounting holes of the pi zero. Two had to be super-glued to the zero.Overall nice case and I believe that with these improvements the marketability of the product would appeal to a larger audience. Even still, a solid buy that I am happy with!